SLIDING ROOF SWITCH ASSEMBLY > REMOVAL |
| 1. REMOVE ROOF CONSOLE BOX ASSEMBLY |
![]() |
Disengage the 2 guides and using a "TORX" socket wrench T20, remove the 4 screws.
Disconnect the connector and then remove the roof console box.
| 2. REMOVE SLIDE ROOF MOTOR SWITCH |
![]() |
Disconnect the connector.
![]() |
Disengage the 4 claws and remove the slide roof motor switch with cover.
![]() |
Disengage the 4 claws and remove the slide roof motor switch.