VOLTAGE INVERTER > INSTALLATION |
| 1. INSTALL VOLTAGE INVERTER |
![]() |
Install the voltage inverter with the 3 bolts.
Connect the connector.
| 2. INSTALL QUARTER TRIM PANEL ASSEMBLY LH |
Connect the connector.
Engage the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Install the 2 clips.

![]() |
Engage the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Engage the 3 claws to install the outer lap belt anchor cover.
| 3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) |
Connect the 5 connectors.
Engage the 12 clips to install the quarter trim panel.
Install the 2 bolts.
Engage the 2 clamps to install the wire harness.
Install the 2 clips.

![]() |
Engage the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Engage the 3 claws to install the outer lap belt anchor cover.
| 4. INSTALL REAR FLOOR MAT SUPPORT PLATE |
![]() |
Engage the 5 clips to the 4 claws, and install the rear floor mat support plate.
| 5. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
![]() |
Engage the 2 claws to install the cover.
| 6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 7. INSTALL REAR DOOR SCUFF PLATE LH |
| 8. INSTALL REAR FLOOR STEP NO. 1 COVER |
![]() |
Engage the 2 claws to install the rear floor step No. 1 cover.
| 9. INSTALL REAR FLOOR STEP NO. 2 COVER |
![]() |
Engage the 2 claws to install the rear floor step No. 2 cover.
| 10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH |
| 11. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat) |
Remove the rear No. 2 seat assembly LH (Click here).
| 12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat) |
Remove the rear No. 2 seat assembly LH (Click here).
| 13. INSTALL DECK BOARD BRACKET |
![]() |
Install the deck board bracket with the 2 bolts.
| 14. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY |
![]() |
Install the deck board reinforcement with the 4 bolts.
| 15. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 5 clips to install the No. 1 deck board.
| 16. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
| 17. INSTALL LUGGAGE COMPARTMENT TRIM BOX |
![]() |
Install the luggage compartment trim box with the 4 bolts.
![]() |
Install the 4 caps.
| 18. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 4 guides to install the No. 2 deck board.