Home
›
Vehicle Exterior
›
DOOR / HATCH
›
POWER BACK DOOR WARNING BUZZER
POWER BACK DOOR WARNING BUZZER > INSPECTION
for Preparation
Click here
1. INSPECT POWER BACK DOOR WARNING BUZZER
Measure the resistance according to the value(s) in the table below.
HINT:
When battery voltage is applied directly to the buzzer, the buzzer will not sound.
Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Always
950 to 1050 Ω
If the result is not as specified, replace the wireless door lock buzzer.