Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE HOOD LOCK CONTROL CABLE COVER


    B192157E01
  1. Using a screwdriver with its tip wrapped in protective tape, remove the hood lock nut cap.



    B192506
  1. Remove the screw and nut.

  1. Disengage the claw and remove the hood lock control cover.



2. REMOVE HOOD LOCK ASSEMBLY


    B195038
  1. Using a screwdriver, remove the hood lock nut cap.



    B192509
  1. Remove the 2 bolts and nut and remove the hood lock assembly.