HEADLIGHT CLEANER SWITCH > INSPECTION |
| 1. INSPECT HEAD LIGHT CLEANER SWITCH ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 5 (L) - 8 (B) | Pushed | Below 1 Ω |
| 5 (L) - 8 (B) | Free | 10 kΩ or higher |
![]() |
Check the illumination operation.
Connect the positive (+) battery lead to terminal 7 (ILL+) and the negative (-) battery lead to terminal 6 (ILL-), and then check that the illumination illuminates.