Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function(s) can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting / Power window.

  5. Select the setting by referring to the table below.

    Power Window 
    Display (Item)
    Default
    Content
    Setting
    Door Key P/W Up
    ON
    Function that raises the driver and passenger power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 seconds.
    ON, OFF
    Door Key P/W Down
    ON
    Function that lowers the driver and passenger power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 seconds.
    ON, OFF
    Door Key Linked Back P/W UP
    AVAIL
    Function that raises the back door power window when, with a key is used to hold the back door key cylinder to the lock position for more than 0.7 seconds.
    NOT AVL, AVAIL
    Door Key Linked Back P/W DOWN
    AVAIL
    Function that lowers the back door power windows when, with a key is used to hold the back door key cylinder to the unlock position for more than 0.7 seconds.
    NOT AVL, AVAIL