Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY (for 1UR-FE)


    C164127E03
  1. Remove SST from the transmission.

    SST
    09325-40010  

  1. Insert the propeller shaft assembly into the transmission.



    C179257E04
  1. Align the matchmarks on the propeller shaft flange and differential flange.
    Text in Illustration 
    *a
    Matchmarks

  1. Install the propeller shaft assembly to the differential side, and install the 4 nuts.

    Torque:
    70 N*m{ 714 kgf*cm , 52 ft.*lbf }



2. INSTALL PROPELLER SHAFT ASSEMBLY (for 3UR-FE)


    C160071E02
  1. Remove SST from the transmission.

    SST
    09325-60010  

  1. Insert the propeller shaft assembly into the transmission.



    C179257E04
  1. Align the matchmarks on the propeller shaft flange and differential flange.
    Text in Illustration 
    *a
    Matchmarks

  1. Install the propeller shaft assembly to the differential side, and install the 4 nuts.

    Torque:
    70 N*m{ 714 kgf*cm , 52 ft.*lbf }



3. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK