Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE ASSEMBLY

REAR SUNSHADE ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR WINDOW CURTAIN RH


    B191442
  1. Install the rear window curtain with the 5 screws.



2. INSTALL REAR WINDOW CURTAIN LH

HINT:
Use the same procedure for both sides.



3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH
  1. Connect the 3 connectors.

  1. Engage the 11 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



  1. Install the 2 clips.


    B222459



    B190147
  1. Engage the 2 claws to install the cover.



    B190146
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH
  1. Connect the 5 connectors.

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clamps to install the wire harness.



  1. Install the 2 clips.


    B222460



    B193068
  1. Engage the 2 claws to install the cover.



    B191816
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B191818
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B193920
  1. Engage the 3 claws to install the outer lap belt anchor cover.



5. INSTALL REAR FLOOR MAT SUPPORT PLATE


B190142
  1. Engage the 5 clips to the 4 claws, and install the rear floor mat support plate.



6. INSTALL ROPE HOOK ASSEMBLY


B190141
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B190139
  1. Engage the 2 claws to install the cover.



7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


B190154E01
  1. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
    Paint Mark 
    Area
    Color
    RH side
    Pink
    LH side
    Purple



8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure for both sides.



9. INSTALL REAR DOOR SCUFF PLATE RH


B186666
  1. Engage the 2 claws and 5 clips to install the rear door scuff plate.

  1. Install the 2 bolts.



    B186665
  1. Engage the 6 claws, 5 clips and 2 guides to install the rear door scuff plate.

  1. Install the screw.



10. INSTALL REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.



11. INSTALL REAR FLOOR STEP NO. 1 COVER


B191404
  1. Engage the 2 claws to install the rear floor step No. 1 cover.



12. INSTALL REAR FLOOR STEP NO. 2 COVER


B193890
  1. Engage the 2 claws to install the rear floor step No. 2 cover.



13. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH


B191794
  1. Engage the 2 clips and 5 claws to install the rear cushion hinge lower cover RH.



14. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH

HINT:
Use the same procedure for both sides.



15. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
  1. for Manual Seat:
    Install the rear No. 2 seat assembly RH .

  1. for Power Seat:
    Install the rear No. 2 seat assembly RH .



16. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
  1. for Manual Seat:
    Install the rear No. 2 seat assembly LH .

  1. for Power Seat:
    Install the rear No. 2 seat assembly LH .



17. INSTALL DECK BOARD BRACKET


B190119
  1. Install the deck board bracket with the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



18. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY


B190120
  1. Install the deck board reinforcement with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



19. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY


B190117
  1. Engage the 5 clips to install the No. 1 deck board.



20. INSTALL ROPE HOOK ASSEMBLY


B191405
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure for both sides.



21. INSTALL LUGGAGE COMPARTMENT TRIM BOX


B190116
  1. Install the luggage compartment trim box with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



    B194633
  1. Install the 4 caps.



22. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


B194608
  1. Engage the 4 guides to install the No. 2 deck board.