Home › Vehicle Interior › SEAT › POWER SEAT SWITCH (for Rear No. 2 Seat)

POWER SEAT SWITCH (for Rear No. 2 Seat) > REMOVAL

for Preparation Click here



1. REMOVE QUARTER TRIM COVER RH


    B191443
  1. Detach the 2 claws and the 2 guides and remove the quarter trim cover.

  1. Disconnect the 2 connectors.



2. REMOVE REAR POWER SEAT SWITCH (for RH Side)


    B191445
  1. Detach the 2 claws and remove the rear power seat switch.



3. REMOVE FOLD SEAT SWITCH ASSEMBLY (for RH Side)


    B191809
  1. Detach the 2 claws and remove the fold seat switch assembly.



4. REMOVE QUARTER TRIM COVER LH

HINT:
Use the same procedure for the RH side and LH side.



5. REMOVE REAR POWER SEAT SWITCH (for LH Side)

HINT:
Use the same procedure for the RH side and LH side.



6. REMOVE FOLD SEAT SWITCH ASSEMBLY (for LH Side)

HINT:
Use the same procedure for the RH side and LH side.



7. REMOVE QUARTER TRIM REAR COVER LH (for Luggage Compartment)


    B191791E01
  1. Using a screwdriver, detach the 3 claws and the guides and remove the quarter trim cover LH.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the 2 connectors.



8. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment RH Seat)


    B193071
  1. Detach the 2 claws and remove the fold seat switch assembly.



9. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment LH Seat)


    B193072
  1. Detach the 2 claws and remove the fold seat switch assembly.