Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > REASSEMBLY

for Preparation Click here



1. INSTALL CONSOLE BOX HOLDER HOOK (for Rear Side)


B188232
  1. Attach the claw to install the console box holder hook.



2. INSTALL CONSOLE BOX HOLDER HOOK (for Front Side)


B188231
  1. Attach the claw to install the console box holder hook.



3. INSTALL POWER OUTLET SOCKET COVER


    E162363
  1. Engage the 2 claw and install the power outlet socket cover.



4. INSTALL POWER POINT SOCKET ASSEMBLY


    E162362
  1. Engage the claw and install the power outlet socket assembly.



5. INSTALL CONSOLE BOX BEZEL


B188228
  1. Attach the claw to install the console box bezel.



6. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


B188240
  1. Install the interior illumination light with the screw.



7. INSTALL CONSOLE BOX WIRE


B188226
  1. Attach the 5 clamps to install the console box wire.

  1. Connect the 2 connectors.



8. INSTALL CONSOLE BOX CUSHION


B188229
  1. Install the 2 cushions.



9. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY


B188225
  1. Install the console compartment door with the 8 screws.



10. INSTALL CONSOLE COMPARTMENT DOOR CUSHION


B188242
  1. Install the 2 cushions.



11. INSTALL CONSOLE REAR END PANEL GARNISH


B188241
  1. Install the console rear end panel garnish with the 4 screws.



12. INSTALL CONSOLE BOX REGISTER BEZEL


B188239
  1. Attach the 4 claws to install the console box register bezel.

  1. Install the 4 screws.



13. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (w/o Rear Seat Entertainment System)


    B219734
  1. Attach the 2 wire harness clamps.

  1. Connect the 2 connectors.



    B219733
  1. Attach the 6 clips to install the console rear end panel.



14. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (w/ Rear Seat Entertainment System)


    B219809
  1. Attach the 4 claws and 2 wire harness clamps to install the 2 headphone terminals.



    B188236
  1. Attach the 2 clamps to install the console rear end panel.

  1. Connect the 4 connectors.



    B188234
  1. Attach the 6 clips to install the console rear end panel.



15. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY


B188238
  1. Attach the 4 clips to install the cup holder.



16. INSTALL CONSOLE BOX COVER REAR


B188237
  1. Attach the 2 claws to install the console box rear cover.