REAR CONSOLE BOX > REASSEMBLY |
| 1. INSTALL CONSOLE BOX ORNAMENT |
![]() |
Install the console box ornament with the 2 screws.
| 2. INSTALL REAR DOOR PANEL CUSHION |
![]() |
Install the 2 cushions.
| 3. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY |
![]() |
Install the door hinge with the 4 screws.
![]() |
Engage the 4 claws and install the console box retainer.
Install the 10 screws.
| 4. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER |
![]() |
Install the door box cover with the 7 screws.
| 5. INSTALL REAR CONSOLE ARMREST HINGE SUB-ASSEMBLY |
![]() |
Install the armrest hinge with the 6 screws.
| 6. INSTALL REAR DOOR PANEL CUSHION |
![]() |
Install the 2 cushions.
| 7. INSTALL CONSOLE COMPARTMENT DOOR BOX INSERT |
![]() |
Install the door box insert with the 6 screws.
| 8. INSTALL CONSOLE COMPARTMENT DOOR LOCK LEVER |
![]() |
Install the door lock lever with the 2 screws.
| 9. INSTALL NO. 2 CONSOLE BOX HOLE COVER |
![]() |
Engage the 2 claws and install the console box hole cover.
| 10. INSTALL CONSOLE REAR END PANEL GARNISH |
![]() |
Engage the 6 clips and install the console rear end panel garnish.
| 11. INSTALL CONSOLE BOX LOWER |
![]() |
Install the console box lower with the 10 screws.
| 12. INSTALL CONSOLE UPPER PANEL NO. 2 GARNISH |
![]() |
Install the console upper panel garnish with the 7 screws.
| 13. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH |
![]() |
Install the console upper panel garnish with the 7 screws.
| 14. INSTALL CONSOLE BOX COVER REAR |
![]() |
Engage the 2 claws and 4 clips and install the console box rear cover.
Install the 2 screws.
| 15. INSTALL UPPER CONSOLE DOOR SUB-ASSEMBLY |
![]() |
Install the upper console door with the 5 screws.
| 16. INSTALL EQUIPMENT SET PANEL COVER |
![]() |
Engage the 4 clips and install the equipment set panel cover.
Install the 2 screws.
| 17. INSTALL NO. 1 INSTRUMENT PANEL CUP HOLDER SPRING |
![]() |
Install the cup holder spring to the cup holder rail.
| 18. INSTALL CONSOLE BOX INSERT |
![]() |
Engage the 2 claws and install the console box insert.
Install the 5 screws.
| 19. INSTALL CONSOLE BOX |
![]() |
Install 2cup holder rails to the new console box.
Install the console box.
| 20. INSTALL CONSOLE BOX ASSEMBLY |
![]() |
Engage the 4 clips and install the console box.