LUGGAGE COMPARTMENT ROOM LIGHT > INSPECTION |
| 1. INSPECT NO. 2 ROOM LIGHT ASSEMBLY |
![]() |
Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2 or 3.
Check that the room light comes on.
| Measurement Condition | Switch Condition | Specified Condition |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | ON | Room light comes on |
| OFF | Room light turns off | |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 3 | DOOR | Room light comes on |
| OFF | Room light turns off |