Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT (for Center)

ROOM LIGHT (for Center) > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (w/o Rear Seat Entertainment System)


    E160699E01
  1. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2 or 3.

  1. Check that the room light comes on.

    OK:
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 2
    ON
    Room light comes on
    OFF
    Room light turns off
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 3
    ON
    Room light comes on
    OFF
    Room light turns off

    If the result is not as specified, replace the No. 1 room light assembly.



2. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (w/ Rear Seat Entertainment System)


    E160713E02
  1. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2 or 3.

  1. Check that the room light comes on.

    OK:
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 2
    ON
    Room light comes on
    OFF
    Room light turns off
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 3
    ON
    Room light comes on
    OFF
    Room light turns off

    If the result is not as specified, replace the No. 1 room light assembly.