Home › Vehicle Interior › LIGHTING (INT) › DOOR COURTESY LIGHT (for Front Door)

DOOR COURTESY LIGHT (for Front Door) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the RH side.



1. REMOVE COURTESY LIGHT ASSEMBLY


    E161801E02
  1. Using a molding remover, disengage the claw and remove the courtesy light.
    Text in Illustration 
    *1
    Moulding Remover

  1. Disconnect the connector.



2. REMOVE COURTESY LIGHT BULB


  1. w/ Cover:



      E161850
    1. Disengage the 2 claws and remove the cover.

  1. Remove the courtesy light bulb.