Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE QUARTER TRIM COVER LH (for 14 Speakers)


    E183886
  1. Disengage the 5 claws and 2 guides and remove the quarter trim cover.



2. REMOVE QUARTER TRIM COVER LH (for 8 Speakers)


    E161822
  1. Disengage the 4 claws and 2 guides and remove the quarter trim cover.



3. REMOVE QUARTER TRIM COVER RH (for RH Side)


    E161823
  1. Disengage the 4 claws and 2 guides and remove the quarter trim cover.



4. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    E161824
  1. Disconnect the 2 connectors.

  1. Remove the 2 nuts.



    E161825
  1. Slide the rear combination light toward the rear of the vehicle.