Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR TURN SIGNAL LIGHT BULB


    E161830
  1. Install the rear turn signal light bulb into the light socket.

  1. Turn the rear turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



2. INSTALL TAIL AND STOP LIGHT BULB


    E161828
  1. Install the tail and stop light bulb into the light socket.

  1. Turn the tail and stop light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



3. INSTALL REAR COMBINATION LIGHT GASKET


    E161826
  1. Install a new rear combination light gasket.