Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR LIGHT GASKET LH


    E161832
  1. Remove the rear light gasket.

    NOTICE:
    1. Detach the gasket if it adheres to the body.
    2. Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.



2. REMOVE TAIL LIGHT BULB


    E161833
  1. Turn the tail light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the tail light bulb from the light socket.



3. REMOVE BACK UP LIGHT BULB


    E161835
  1. Turn the back up light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

  1. Remove the back up light bulb from the light socket.



4. REMOVE WIRE HARNESS


    E161837
  1. Disengage the harness clamp and remove the wire harness.