Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL WIRE HARNESS


    E161837
  1. Engage the harness clamp and install the wire harness.



2. INSTALL BACK UP LIGHT BULB


    E161836
  1. Install the back up light bulb into the light socket.

  1. Turn the back up light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



3. INSTALL TAIL LIGHT BULB


    E161834
  1. Install the tail light bulb into the light socket.

  1. Turn the tail light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.



4. INSTALL REAR LIGHT GASKET LH


    E161832
  1. Install a new rear light gasket.