ROCKER PANEL MOULDING > INSTALLATION |
| 1. INSTALL ROCKER PANEL FRONT MOULDING ASSEMBLY |
![]() |
Engage the clip and install the rocker panel front moulding.
Tighten the screw.
| 2. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY |
![]() |
Engage the claw and install the body rocker panel moulding.
Tighten the 4 screws.
| 3. INSTALL SIDE STEP ASSEMBLY |
![]() |
Install the side step with the 8 bolts.