Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > REASSEMBLY

for Preparation Click here



1. INSTALL CENTER STOP LIGHT SOCKET AND WIRE


B195321
  1. Pass a piece of string through the new rear spoiler.

  1. Tie the string to the center stop light socket and wire.

  1. Pull the string and pass the center stop light socket and wire through the inside of the rear spoiler. Then pull the connector through the opening of the rear spoiler.



2. INSTALL CENTER STOP LIGHT ASSEMBLY


E161838
  1. Install the center stop light with the 2 screws.