Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side)

REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side) > DISASSEMBLY

for Preparation Click here


NOTICE:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY


    B191205
  1. Remove the 2 clips.



    B191206
  1. Remove the bolt and rear No. 2 seat inner belt sub-assembly.



2. REMOVE REAR SEAT LOCK COVER INNER LH


    B191207
  1. Remove the screw.

  1. Detach the 3 claws and remove the rear seat lock cover inner LH.



3. REMOVE REAR SEAT LOCK COVER OUTER RH


    B191209
  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat lock cover outer RH.



4. REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY RH


    B191211
  1. Remove the 2 bolts.

  1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly RH.



5. REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY RH


    B191212
  1. Remove the hog rings.



    B191214
  1. Detach the hooks and remove the No. 3 seat cushion spring assembly RH.



6. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH


    B191215
  1. Remove the hog rings and No. 2 seat cushion cover sub-assembly RH from the No. 2 seat cushion pad.



7. REMOVE REAR SEAT CUSHION COVER LH


    B191218
  1. Remove the screw.

  1. Detach the claw and remove the rear seat cushion cover LH.



8. REMOVE REAR SEAT CUSHION COVER OUTER RH


    B191217
  1. Remove the screw.

  1. Detach the claw and remove the rear seat cushion cover outer RH.



9. REMOVE REAR SEAT HEADREST ASSEMBLY


B288882E01
  1. Using a screwdriver, push in the headrest lock button to release the headrest lock.

    HINT:
    Tape the screwdriver tip before use.

  1. Pull up and remove the rear seat headrest assembly.

    NOTICE:
    When removing the rear seat headrest assembly while it is in the vehicle, fold down the headrest before removing it so that it does not contact the roof.



10. REMOVE REAR NO. 2 SEAT HANDLE


    B191219
  1. Remove the 2 screws.

  1. Disconnect the rear No. 1 seat lock cable assembly and remove the rear No. 2 seat handle.



11. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH


    B191220
  1. Remove the screw.

  1. Disconnect the rear No. 1 seat lock cable assembly and remove the rear back lock control lever sub-assembly RH.



12. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH


    B292871
  1. Detach the 9 clips and remove the rear seatback board sub-assembly RH.



13. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY


    B290096
  1. Detach the 4 claws and remove the 2 rear No. 2 seat headrest supports.



14. REMOVE SEATBACK COVER WITH PAD


    B195219
  1. Detach the hook.



    B191227
  1. Detach the hooks and remove the seatback cover with pad.



15. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH


    B191231
  1. Remove the hog rings and No. 2 seatback cover sub-assembly RH from the No. 2 seatback pad.



16. REMOVE REAR SEAT RECLINING COVER INNER LH


    B191236
  1. Remove the screw.

  1. Detach the claw and remove the rear seat reclining cover inner LH.



17. REMOVE REAR SEAT RECLINING COVER INNER RH


    B191235
  1. Remove the screw.

  1. Detach the claw and remove the rear seat reclining cover inner RH.



18. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY


    B191238
  1. Detach the 3 cable ties.

  1. Disconnect the 2 clamps.

  1. Rotate the cable ends.

  1. Pull the rear No. 1 seat lock cable assembly through the No. 3 seatback frame sub-assembly RH and remove the rear No. 1 seat lock cable assembly.



19. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH


    B191240
  1. Remove the 5 bolts and No. 3 seatback frame sub-assembly RH.



20. REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY


    B191244
  1. Remove the 2 bolts and rear No. 2 seat rod sub-assembly.