REAR NO. 2 SEAT OUTER BELT ASSEMBLY > REMOVAL |
| 1. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH |
Remove the curtain shield airbag assembly (Click here).
| 2. REMOVE POWER BACK DOOR ROD (w/ Power Back Door) |
![]() |
Using a screwdriver with its tip wrapped in protective tape, remove the 2 stop rings and power back door rod.
| 3. REMOVE POWER BACK DOOR UNIT ASSEMBLY (w/ Power Back Door) |
![]() |
Disconnect the connector.
Remove the 4 bolts and remove the power back door unit.
| 4. REMOVE QUARTER TRIM BRACKET RH (for RH Side) |
![]() |
Detach the clamp.
Remove the 2 bolts and the quarter trim bracket.
| 5. REMOVE COVER SUB-ASSEMBLY (for RH Side) |
![]() |
Detach the 2 claws and remove the cover.
| 6. REMOVE REAR SIDE NO. 1 AIR DUCT (for RH Side) |
![]() |
Detach the clamps.
Remove the clip and the air duct.
| 7. REMOVE QUARTER SIDE SPEAKER ASSEMBLY (for RH Side) |
![]() |
Disconnect the connector.
Disengage the guide.
Remove the 2 bolts and the quarter side speaker RH.
| 8. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 bolts and rear seat shoulder belt guide.
| 9. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH |
![]() |
Remove the nut and shoulder anchor.
![]() |
Remove the 2 bolts and rear No. 2 seat outer belt assembly.
| 10. REMOVE REAR ROOF NO. 1 AIR DUCT (for RH Side) |
![]() |
Remove the 3 clips and rear roof No. 1 air duct.
| 11. REMOVE REAR SEAT OUTER BELT ANCHOR BRACKET ASSEMBLY RH |
![]() |
Remove the 2 bolts and rear seat outer belt anchor bracket assembly.