Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat)

REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat) > REMOVAL

for Preparation Click here



1. REMOVE REAR CENTER SEAT ASSEMBLY
  1. Remove the rear center seat assembly (Click here).



2. REMOVE REAR SEAT CUSHION HINGE COVER UPPER LH


    B191147
  1. Detach the hook.

  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat cushion hinge cover.



3. REMOVE REAR SEAT CUSHION HINGE COVER UPPER RH


    B191148
  1. Detach the hook.

  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat cushion hinge cover.



4. REMOVE CENTER SEAT CUSHION ASSEMBLY


    B191149
  1. Detach the hook and loop fastener and hook.



    B191150
  1. Remove the 2 bolts.

  1. Using a T45 "TORX" socket, remove the 2 "TORX" bolts and 2 bushes. Then remove the center seat cushion assembly.



5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


6. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY


    B191154
  1. Detach the 6 clips and remove the rear seatback board sub-assembly.



7. REMOVE CENTER SEAT HINGE COVER LH


    B191155
  1. Remove the screw.

  1. Detach the 3 claws and clip and remove the center seat hinge cover.



8. REMOVE CENTER SEAT HINGE COVER RH


    B191156
  1. Remove the screw.

  1. Detach the 3 claws and clip and remove the center seat hinge cover.



9. REMOVE REAR SEAT CUSHION UNDER COVER


    B191157
  1. Remove the 2 screws and rear seat cushion under cover.



10. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 1


    B191160
  1. Detach the 4 claws and remove the rear seat shoulder hole cover No. 1.



11. REMOVE REAR SEATBACK LOCK BEZEL UPPER


    B191159
  1. Remove the center seat outer belt lower bolt.



    B191161
  1. Remove the 2 screws and rear seatback lock bezel upper.



12. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 2


    B191162
  1. Using a T30 "TORX" socket, remove the 2 "TORX" bolts and rear seat shoulder belt hole cover No. 2.



13. REMOVE REAR SEATBACK LOCK STRIKER COVER


    B191163E01
  1. Using a screwdriver, detach the claw and guide and remove the rear seatback lock striker cover.

    HINT:
    Tape the screwdriver tip before use.



14. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    B191245
  1. Remove the 2 screws.

  1. Disconnect the cable and remove the rear seat lock control lever sub-assembly.



15. REMOVE REAR SEAT HEADREST SUPPORT


B191165
  1. Detach the 4 claws and remove the 2 rear seat headrest supports.



16. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 3


    B191168
  1. Remove the 2 screws.

  1. Detach the 2 claws and remove the rear seat shoulder belt hole cover No. 3.



17. REMOVE ARMREST ASSEMBLY


    B191167
  1. Remove the 2 nuts and armrest assembly.



18. REMOVE SEATBACK COVER WITH PAD


    B191176
  1. Remove the 5 hog rings.



    B195228
  1. Remove the 6 hog rings.



    B195220
  1. Detach the hooks.



    B191175
  1. Detach the hooks and remove the seatback cover with pad.



19. REMOVE CENTER SEAT OUTER BELT ASSEMBLY


B191179
  1. Remove the cable tie.

  1. Remove the 4 nuts and center seat outer belt assembly.