Home › Vehicle Interior › SEAT › POWER SEAT CONTROL ECU (for LH Side)

POWER SEAT CONTROL ECU (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL FOLD SEAT CONTROL ECU


    B194055
  1. Install the fold seat control ECU with 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Engage the 2 connectors.



2. INSTALL W/ BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)


    E161046
  1. Install the w/box No. 1 speaker with the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.



3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Manual Seat)
  1. Connect the connector.

  1. Engage the 11 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



  1. Install the 2 clips.


    B222458



    B193068
  1. Engage the 2 claws to install the cover.



    B191816
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B191818
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B193920
  1. Engage the 3 claws to install the outer lap belt anchor cover.



4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)
  1. Connect the 5 connectors.

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clamps to install the wire harness.



  1. Install the 2 clips.


    B222460



    B193068
  1. Engage the 2 claws to install the cover.



    B191816
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B191818
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B193920
  1. Engage the 3 claws to install the outer lap belt anchor cover.



5. INSTALL REAR FLOOR MAT SUPPORT PLATE


B190142
  1. Engage the 5 clips to the 4 claws, and install the rear floor mat support plate.



6. INSTALL ROPE HOOK ASSEMBLY


B190141
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B190139
  1. Engage the 2 claws to install the cover.



7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure for both sides.



8. INSTALL REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.



9. INSTALL REAR FLOOR STEP NO. 1 COVER


B191404
  1. Engage the 2 claws to install the rear floor step No. 1 cover.



10. INSTALL REAR FLOOR STEP NO. 2 COVER


B193890
  1. Engage the 2 claws to install the rear floor step No. 2 cover.



11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH

HINT:
Use the same procedure for both sides.



12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
  1. Install the rear No. 2 seat assembly LH (Click here).



13. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
  1. Install the rear No. 2 seat assembly LH (Click here).