Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)

REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) > INSPECTION

for Preparation Click here



1. INSPECT POWER SEAT MOTOR ASSEMBLY RH


B194064E01
  1. Check operation of the power seat motor.

    1. Apply battery voltage to the power seat motor and check the operation of the power seat motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.



2. INSPECT POWER SEAT MOTOR ASSEMBLY


B194065E01
  1. Check operation of the power seat motor.

    1. Apply battery voltage to the power seat motor and check the operation of the power seat motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.