BACK DOOR BELT MOULDING > REMOVAL |
| 1. REMOVE BACK DOOR OUTSIDE MOULDING LH |
![]() |
Disengage the 5 clips and remove the back door outside moulding.
| 2. REMOVE BACK DOOR OUTSIDE MOULDING RH |
| 3. REMOVE LINEAR WIPER STEP RH |
![]() |
Disengage the claw and guide and remove the linear wiper step RH
| 4. REMOVE BACK DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY |
![]() |
Apply protective tape to the door panel in the area around the back door glass outer weatherstrip.
![]() |
Using a moulding remover, disengage the 9 claws and remove the back door glass outer weatherstrip.