NAVIGATION SYSTEM (for DVD) > Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter |

| 1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - STEREO JACK ADAPTER) |
![]() |
Disconnect the I24 navigation receiver assembly connector.
Disconnect the H107 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| I24-17 (ALI) - H107-6 (ALO) | Always | Below 1 Ω |
| I24-15 (ARI) - H107-5 (ARO) | Always | Below 1 Ω |
| I24-16 (ASGN) - H107-7 (ASGN) | Always | Below 1 Ω |
| I24-18 (AUXG) - H107-9 (AGND) | Always | Below 1 Ω |
| I24-19 (AUXI) - H107-8 (AUXO) | Always | Below 1 Ω |
| I24-17 (ALI) - Body ground | Always | 10 kΩ or higher |
| I24-15 (ARI) - Body ground | Always | 10 kΩ or higher |
| I24-16 (ASGN) - Body ground | Always | 10 kΩ or higher |
| I24-19 (AUXI) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||