Home › Audio/Visual/Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM

BLIND SPOT MONITOR SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK BLIND SPOT MONITOR SENSOR RH
E231427E01

Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
P25-1 (BRGD) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V
P25-2 (BSTR) - P25-1 (BRGD)
LG - W-B
Turn signal switch signal
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) on, turn signal switch in right turn position
11 to 14 V
P25-3 (BSSW) - P25-1 (BRGD)
B - W-B
Blind spot monitor main switch assembly (warning canceling switch assembly) power source signal
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) on
11 to 14 V
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) off
Below 1 V
P25-5 (BRB) - P25-1 (BRGD)
BR - W-B
IG power source signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
P25-6 (OMIR) - P25-1 (BRGD)
B - W-B
Blind spot monitor indicator power source signal RH
Blind spot monitor indicator illuminated
8.5 to 14 V
Blind spot monitor indicator not illuminated
Below 3 V

CHECK BLIND SPOT MONITOR SENSOR LH
E231427E02

Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
O46-1 (BLGD) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V
O46-2 (BSTL) - O46-1 (BLGD)
G - W-B
Turn signal switch signal
Ignition switch ON, blind spot monitor main switch assembly (warning canceling switch assembly) on, turn signal switch in left turn position
11 to 14 V
O46-3 (LGND) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V
O46-5 (BLB) - O46-1 (BLGD)
BR - W-B
IG power source signal
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
O46-6 (OMIL) - O46-1 (BLGD)
B - W-B
Blind spot monitor indicator power source signal LH
Blind spot monitor indicator illuminated
8.5 to 14 V
Blind spot monitor indicator not illuminated
Below 3 V