OUTER REAR VIEW MIRROR GLASS > INSPECTION |
| 1. INSPECT OUTER REAR VIEW MIRROR GLASS LH (w/ Blind Spot Monitor) |
![]() |
Check the blind spot monitor indicator operation.
Connect a positive (+) lead from the battery to terminal 7 (+) and a negative (-) lead to terminal 5 (-).
Check that the blind spot monitor indicator comes on.
| *a | Component without harness connected (Outer rear view mirror glass LH) |
| 2. INSPECT OUTER REAR VIEW MIRROR GLASS RH (w/ Blind Spot Monitor) |
![]() |
Check the blind spot monitor indicator operation.
Connect a positive (+) lead from the battery to terminal 7 (+) and a negative (-) lead to terminal 5 (-).
Check that the blind spot monitor indicator comes on.
| *a | Component without harness connected (Outer rear view mirror glass RH) |