Home › Engine / Hybrid System ยท 1UR-FE › LUBRICATION › ENGINE OIL COOLER

ENGINE OIL COOLER > REMOVAL > Preparation



SST 
I002370
09228-06501
Oil Filter Wrench




EQUIPMENT
Oil pressure gauge
-
Steel square
-
Torque wrench
-
Vernier caliper
-


LUBRICANT
Item
Capacity
Classification
Drain and refill
without Oil filter change
7.1 liters (7.4 US qts, 6.2 Imp qts)
Standard Oil Grade (for USA):
ILSAC multigrade engine oil
0W-20
Standard Oil Grade (for Canada):
ILSAC multigrade engine oil
0W-20
5W-20
(0W-20 is best choice for fuel economy and good starting in cold weather.)
with Oil filter change
7.5 liters (7.9 US qts, 6.6 Imp. qts)
Dry fill
9.3 liters (9.8 US qts, 8.2 Imp. qts)


RECOMMENDED TOOLS
J010068
09040-00011
Hexagon Wrench Set
-
J002819
09082-00040
TOYOTA Electrical Tester
-
I002105
(09083-00150)
Test Lead Set
-
J000284
09200-00010
Engine Adjust Kit
-
J001057
(09203-00010)
Thickness Gauge
-


SSM
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-