Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

NAVIGATION SYSTEM > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2.CHECK DISC


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      OK:
      Malfunction disappears.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.



NG
Go to step 3
OK

END (DISC IS DIRTY) 

3.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END (DISC IS DEFECTIVE) 

4.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check that the navigation receiver assembly is properly installed (Click here).

    OK:
    The navigation receiver assembly is properly installed.



NG
REINSTALL NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)