Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › SFI SYSTEM

SFI SYSTEM > PRECAUTION

for Preparation Click here


CAUTION:
When using the intelligent tester, observe the following items for safety reasons:
  1. Read its instruction books before using the intelligent tester.
  2. Prevent the intelligent tester cable from being caught on the pedals, shift lever and steering wheel when driving with the intelligent tester connected to the vehicle.
  3. When driving the vehicle for testing purposes using the intelligent tester, 2 persons are required. One person drives the vehicle, and the other operates the intelligent tester.

NOTICE:
  1. Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components .
  2. Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM .
  3. Perform Reset Memory (AT initialization) for when replacing the automatic transmission assembly, engine assembly or ECM (Click here).

HINT:
Reset Memory cannot be completed by only removing the battery.