- CAUTION:
- When using the intelligent tester, observe the following items for safety reasons:
- Read its instruction books before using the intelligent tester.
- Prevent the intelligent tester cable from being caught on the pedals, shift lever and steering wheel when driving with the intelligent tester connected to the vehicle.
- When driving the vehicle for testing purposes using the intelligent tester, 2 persons are required. One person drives the vehicle, and the other operates the intelligent tester.
- NOTICE:
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components .
- Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM .
- Perform Reset Memory (AT initialization) for when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
- HINT:
- Reset Memory cannot be completed by only removing the battery.