Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use the following procedures to troubleshoot the cruise control system.
  2. *: Use the intelligent tester.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOM CONFIRMATION

      NEXT


      4.CHECK CAN COMMUNICATION SYSTEM*
      1. Check for output DTCs.
        Result: 
        Proceed to
        Proceed to
        CAN DTC is not output
        A
        CAN DTC is output
        B

        HINT:
        The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.



      B.
      GO TO CAN COMMUNICATION SYSTEM (Click here).
      A


      5.DTC CHECK AND CLEAR*
        Refer to DTC Check / Clear (Click here).

      NEXT


      6.CHECK FOR DTCS (OTHER THAN CAN SYSTEM DTC)*
        Result: 
        Result
        Proceed to
        DTC is not output
        A
        DTC is output
        B


      B.
      GO TO DTC CHART (Click here).
      A


      7.PROBLEM SYMPTOM CONFIRMATION
        Result: 
        Result
        Proceed to
        Symptom does not occur
        A
        Symptom occurs
        B


      B.
      Go to STEP 9
      A


      8.SYMPTOM SIMULATION
        Refer to Electronic Circuit Inspection Procedure (Click here).

      NEXT


      9.PROBLEM SYMPTOMS TABLE
        Refer to Problem Symptoms Table (Click here).

      NEXT


      10.CIRCUIT INSPECTION

        NEXT


        11.TERMINALS OF ECM
          Refer to Terminals of ECM (Click here).

        NEXT


        12.IDENTIFICATION OF PROBLEM

          NEXT


          13.REPAIR OR REPLACE

            NEXT


            14.CONFIRMATION TEST

              NEXT

              END