REAR AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL REAR AIRBAG SENSOR RH |
Check that the ignition switch is off.
Check that the battery negative (-) terminal is disconnected.
![]() |
Attach the guide to Install the rear airbag sensor.
Install the bolt.
Check that there is no looseness in the installation parts of the rear airbag sensor.
Connect the connector to the rear airbag sensor.
| 2. INSTALL REAR AIRBAG SENSOR LH |
| 3. INSTALL REAR SIDE NO. 3 AIR DUCT |
![]() |
Install the air duct with the 2 clips.
| 4. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard) |
Connect the connector.
Attach the 11 clips to install the quarter trim panel assembly.
Install the 2 bolts.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 5. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Standard) |
Connect the connector.
Attach the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 6. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) |
Connect the 3 connectors.
Attach the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 7. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) |
Connect the 5 connectors.
Attach the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Attach the 2 clamps to install the wire harness.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 8. INSTALL REAR FLOOR MAT SUPPORT PLATE |
![]() |
Attach the 5 clips and 4 claws to install the rear floor mat support plate.
| 9. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
| Area | Color |
| RH side | Pink |
| LH side | Purple |
| 11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 12. INSTALL REAR DOOR SCUFF PLATE RH |
![]() |
Attach the 2 claws and 5 clips to install the rear door scuff plate.
Install the 2 bolts.
![]() |
Attach the 6 claws, 5 clips and 2 guides to install the rear door scuff plate.
Install the bolt.
| 13. INSTALL REAR DOOR SCUFF PLATE LH |
| 14. INSTALL REAR FLOOR STEP NO. 1 COVER |
![]() |
Attach the 2 claws to install the rear floor step No. 1 cover.
| 15. INSTALL REAR FLOOR STEP NO. 2 COVER |
![]() |
Attach the 2 claws to the install the rear floor step No. 2 cover.
| 16. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH |
![]() |
Attach the 2 clips and 5 claws to install the rear cushion hinge lower cover RH.
| 17. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH |
| 18. INSTALL REAR NO. 2 SEAT ASSEMBLY RH |
for Manual Seat:
Install the rear No. 2 seat assembly RH (Click here )
for Power Seat:
Install the rear No. 2 seat assembly RH (Click here )
| 19. INSTALL REAR NO. 2 SEAT ASSEMBLY LH |
for Manual Seat:
Install the rear No. 2 seat assembly LH (Click here )
for Power Seat:
Install the rear No. 2 seat assembly LH (Click here )
| 20. INSTALL DECK BOARD BRACKET |
![]() |
Install the deck board bracket with the 2 bolts.
| 21. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY |
![]() |
Install the deck board reinforcement with the 4 bolts.
| 22. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY |
![]() |
Attach the 5 clips to install the No. 1 deck board.
| 23. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
| 24. INSTALL LUGGAGE COMPARTMENT TRIM BOX |
![]() |
Install the luggage compartment trim box with the 4 bolts.
![]() |
Install the 4 caps.
| 25. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Attach the 4 guides to install the No. 2 deck board.
| 26. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 27. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).