Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


B190501E01
  1. Temporarily install the mirror by inserting the claw on the mirror into the holes on the vehicle.

  1. Tighten the 3 nuts in the sequence shown in the illustration and install the mirror.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect the connectors.



    B190543
  1. Connect the front door lock remote control cable and the front door inside locking cable.



    B190542
  1. Attach the 10 clips to install the front door trim board sub-assembly.



    B190541
  1. Tighten the 2 screws.

  1. Install the front door armrest cover.



3. INSTALL FRONT ARMREST BASE UPPER PANEL


B190537
  1. Connect the connector.

  1. Attach the 2 clips and 5 claws to install the front armrest base upper panel.



4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B190540
  1. Attach the 4 claws to install the front door inside handle bezel plug



5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (for 14 Speakers)


B190538
  1. Connect the connector.

  1. Attach the 3 clips to install the front door lower frame bracket garnish.



6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


B194240
  1. Attach the 3 clips to install the front door lower frame bracket garnish.