Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH side.
  2. The procedure listed below is for the LH side.



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH


    B194240
  1. Detach the 3 clips and remove the front door lower frame bracket garnish.



2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (for 14 Speakers)


    B190538
  1. Detach the 3 clips and remove the front door lower frame bracket garnish.

  1. Disconnect the connector.



3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B190539
  1. Using a moulding remover, detach the 4 claws and remove the front door inside handle bezel plug.



4. REMOVE FRONT ARMREST BASE UPPER PANEL


    B190537
  1. Detach the 2 clips and 5 claws and remove the front armrest base upper panel.

  1. Disconnect the connector.



5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


B190541
  1. Remove the front door armrest cover.

  1. Remove the 2 screws.



    B190542
  1. Detach the 10 clips.

  1. Disconnect the connector.



    B190543
  1. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board sub-assembly.



6. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY


B190501
  1. Disconnect the connector.

  1. Remove the 3 nuts.

  1. Detach the claw and remove the outer rear view mirror assembly.