Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER

CONDENSER > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


    E104262
  1. Using pliers, install the cooler dryer onto the modulator.



    E101932
  1. Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

    Compressor oil:
    ND-OIL 8 or equivalent



    E101931E03
  1. Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }



2. INSTALL NO. 2 COOLER CONDENSER CUSHION


    I104376
  1. Install the 2 cushions to the cooler condenser.



3. INSTALL NO. 1 COOLER CONDENSER CUSHION


    I104375
  1. Install the collar to the cushions.



    I104374
  1. Install the 2 cushions to the cooler condenser.