POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Door Lock.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
| Auto Lock | ON | Function that locks all doors when vehicle speed reaches a certain level. | ON/OFF |
| Auto Lock/Shift | OFF | Function that locks all doors when shift lever is moved other position from P with engine running and all doors closed. | ON/OFF |
| Auto Unlock/Shift | ON | Function that unlocks all doors when shift lever is moved to P from any other position while the ignition switch to ON. | ON/OFF |
| All Unlock/Open-Close | OFF | Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch to ON. | ON/OFF |