INNER REAR VIEW MIRROR > INSPECTION |
| 1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) |
![]() |
w/ Rear Monitor:
Check operation of the electrochromic inner mirror.
Connect the positive (+) lead of the battery to terminal 1 (IG) and the negative (-) lead to terminal 2 (E).
Attach black-colored tape to the forward sensor to prevent it from sensing light.
Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.
![]() |
w/o Rear Monitor:
Check operation of the electrochromic inner mirror.
Connect the positive (+) lead of the battery to terminal 4 (IG) and the negative (-) lead to terminal 1 (E).
Attach black-colored tape to the forward sensor to prevent it from sensing light.
Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.