DTC B2624 Vehicles Speed Malfunction |
| DTC Code | Detection Condition | Trouble Area |
| B2624 | When either condition below is met:
|
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
Check the DTC of the CAN communication system (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| A | |
| 2.READ VALUE USING INTELLIGENT TESTER (SPEED SIGNAL) |
Use the Data List to check if the speed signal is functioning properly.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Freeze Speed Info | Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| Result | Proceed to |
| OK or NG (Tester indication is abnormal) | A |
| NG (Meter indication is abnormal) | B |
|
| ||||
| A | ||
| ||