Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Rear)

WASHER MOTOR (for Rear) > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E162539
  1. Install the windshield washer motor and pump to the packing of the washer jar.



2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System)
  1. Connect the washer hoses.



    E161326
  1. Connect the 5 connectors and 2 clamps.

  1. Install the windshield washer jar with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System)
  1. Connect the washer hoses.



    E161325
  1. Connect the 3 connectors and 2 clamps.

  1. Install the windshield washer jar with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



4. FILL UP WASHER JAR ASSEMBLY WITH WASHER FLUID