Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front)

WASHER MOTOR (for Front) > REMOVAL

for Preparation Click here



1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System)


    E161326
  1. Disconnect the 5 connectors and 2 clamps.

  1. Remove the 3 bolts and remove the washer jar.



2. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System)


    E161325
  1. Disconnect the 3 connectors and 2 clamps.

  1. Remove the 3 bolts and remove the washer jar.



3. DRAIN WASHER FLUID
  1. Remove the washer hoses and drain the washer fluid.



4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E163902
  1. Pull the washer motor and pump out of the packing of the washer jar.