Function
| Outline
|
Manual lock and unlock function
| This function can lock or unlock all doors by the door lock control switch operation.
|
Key-linked lock and unlock function
| This function, which is linked with the mechanical key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
|
Manual unlock prohibition function
| Performing the door lock operation with a mechanical key will prohibit the unlock operation by the door lock control switch.
|
Key lock-in prevention function
| If driver's door lock operation is performed when the mechanical key is in the ignition key cylinder , all the doors will be unlocked.
|
Shift-linked automatic door lock function*1
| When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
- Turn the ignition switch to ON.
- All doors are closed.
- The shift lever is moved out of P.
- Any of the doors are unlocked.
|
Shift-linked automatic door unlock function
| When the ignition switch is ON, and the shift lever is moved to P from any other position, all the doors will be automatically unlocked.
|
Speed-sensitive automatic door lock
| When conditions listed below are all met, this function causes all doors to automatically lock.
- Vehicle speed is higher than approximately 20 km/h.
- All doors are closed.
- The shift lever is moved to any position other than P or N.
- Any one of the doors are unlocked.
|
Opening driver's door-linked automatic door unlock*1
| All doors are unlocked automatically when the driver's door is opened within 10 seconds after the ignition switch is turned off from ON.
|