Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM

CLIMATE CONTROL SEAT SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK AIR CONDITIONING AMPLIFIER

E124486E13



  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    H67-6 (SG-5) - Body ground
    BR - Body ground
    Ground
    Always
    Below 1 Ω
    H67-8 (S5-2) - Body ground
    SB - Body ground
    Power supply
    Ignition switch ON
    4.5 to 5.5 V
    H67-9 (SHD+) - Body ground
    W - Body ground
    Output climate control signal (Driver side)
    Ignition switch ON
    Seat heater switch blower side volume 3
    Pulse generation
    (See waveform 1)
    H67-10 (SHP+) - Body ground
    BE - Body ground
    Output climate control signal (Front passenger side)
    Ignition switch ON
    Seat heater switch blower side volume 3
    Pulse generation
    (See waveform 1)
    H67-15 (AD-4) - Body ground
    GR - Body ground
    Input climate control signal (Driver side)
    Ignition switch ON
    Seat heater switch volume 0
    4.5 to 5.5 V
    Ignition switch ON
    Seat heater switch blower side volume 3
    Below 1 V
    H67-16 (AD-5) - Body ground
    W - Body ground
    Input climate control signal (Front passenger side)
    Ignition switch ON
    Seat heater switch volume 0
    4.5 to 5.5 V
    Ignition switch ON
    Seat heater switch blower side volume 3
    Below 1 V
    If the result is not as specified, the air conditioning amplifier may have a malfunction.



      B188622E01
    1. Waveform 1: Using an oscilloscope:
      Terminal No. (Symbol)
      Tool setting
      Condition
      H67-9 (SHD+) - Body ground
      H67-10 (SHP+) - Body ground
      2 V/DIV., 500 μsec/DIV.
      Ignition switch ON
      Seat heater switch blower side volume 3