Home › Drivetrain ยท AXLE AND DIFFERENTIAL › REAR AXLE HUB

REAR AXLE HUB > DISASSEMBLY

for Preparation Click here


NOTICE:
Do not allow foreign matter, etc. to contact the ABS rotor bearing.



1. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH


    C181040E01
  1. Gently fix the rear axle hub in a vise.

    NOTICE:
    Do not damage the threads of the hub bolts.

  1. Using SST, remove the bearing.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
    09950-60010   (09951-00550)



    C179624E01
  1. If part of the bearing remains in the rear axle hub, use SST to remove it.

    SST
    09950-00020  
    09950-00030  



2. REMOVE REAR AXLE HUB LH OIL SEAL


    F042761
  1. Using a screwdriver, pry the oil seal.