Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN (for RH Side)

CONDENSER FAN (for RH Side) > INSTALLATION

for Preparation Click here



1. INSTALL BUSH


E179126
  1. Install the 2 grommets and 2 bushes.



2. INSTALL COOLING FAN MOTOR


E179125
  1. Install the cooling fan motor with the 3 screws.

  1. Attach the clamp.



3. INSTALL COOLING FAN ASSEMBLY


E179124
  1. Install the cooling fan with the 3 screws.



4. INSTALL SHROUD BLOWER ASSEMBLY


E179123
  1. Install the shroud blower with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the connector.

  1. Attach the clamp.



5. INSTALL LOW PITCHED HORN ASSEMBLY