Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN (for RH Side)

CONDENSER FAN (for RH Side) > REMOVAL

for Preparation Click here



1. REMOVE LOW PITCHED HORN ASSEMBLY


2. REMOVE SHROUD BLOWER ASSEMBLY


E179123
  1. Detach the clamp.

  1. Disconnect the connector.

  1. Remove the 2 bolts and the shroud blower.



3. REMOVE COOLING FAN ASSEMBLY


E179124
  1. Remove the 3 screws and cooling fan.



4. REMOVE COOLING FAN MOTOR


E179125
  1. Detach the clamp.

  1. Remove the 3 screws and the cooling fan motor.



5. REMOVE BUSH


E179126
  1. Remove the 2 grommets and 2 bushes.