Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN (for LH Side)

CONDENSER FAN (for LH Side) > REMOVAL

for Preparation Click here



1. REMOVE HIGH PITCHED HORN ASSEMBLY


2. REMOVE SHROUD BLOWER ASSEMBLY


E182478
  1. Detach the 2 clamps.

  1. Disconnect the connector.

  1. Remove the 2 bolts and the shroud blower.



3. REMOVE COOLING FAN ASSEMBLY


I104355
  1. Remove the 3 screws and cooling fan.



4. REMOVE COOLING FAN MOTOR


I104356
  1. Detach the 2 clamps.

  1. Remove the 3 screws and the cooling fan motor.



5. REMOVE BUSH


I104357E01
  1. Remove the 2 grommets and 2 bushes.