Home › Drivetrain ยท AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › AIR COOLED OIL COOLER

AIR COOLED OIL COOLER > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY
  1. Remove the front bumper assembly (Click here).



2. REMOVE NO. 2 OIL COOLER HOSE


    C162130E02
  1. Remove the bolt and separate the water by-pass pipe so that the 2 No. 2 oil cooler hoses can be removed.

  1. Loosen the 4 clips and remove the inlet No. 2 oil cooler hose and outlet No. 2 oil cooler hose.



3. REMOVE NO. 1 OIL COOLER HOSE


    C162124E02
  1. Disengage the claw to open the flexible hose clamp.

  1. Loosen the 4 clips and remove the inlet No. 1 oil cooler hose and outlet No. 1 oil cooler hose.



4. REMOVE OIL COOLER TUBE


    C161349
  1. Remove 2 bolts and oil cooler tube.



5. REMOVE AIR COOLED OIL COOLER ASSEMBLY


    C179235
  1. Remove the 3 bolts and air cooled oil cooler assembly.



    C179236
  1. Remove the 2 bolts and oil cooler support bracket.



6. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH


    C179237
  1. Remove the 2 clips and radiator support to frame seal RH.



7. REMOVE TRANSMISSION OIL COOLER AIR DUCT


    C179238
  1. Remove the 4 bolts and remove the No. 1 transmission oil cooler air duct and No. 2 transmission oil cooler air duct.



8. REMOVE NO. 2 OIL COOLER TUBE SUB-ASSEMBLY


    C179239
  1. Remove the bolt and loosen the 2 clips. Then remove the No. 2 oil cooler tube sub-assembly.



9. REMOVE NO. 1 TRANSMISSION OIL COOLER HOSE


    C179240
  1. Loosen the 2 clips and remove the 2 No. 1 transmission oil cooler hoses.